Saturday, September 11, 2010

A limited palette for reserved color

Corot; courtesy of artrenewal.org

Dear Stape...

After trying the experiment with using the limited earth palette for landscapes, I went back to using "normal" color.
But, I am finding more and more that using a full palette tends to produce garish color. You've seen my work, I'm not talking about
carnival like pigments, but compared to museum works, like the Corot you just posted, they look too bright, too literal or something.
The earth palette is very restrictive.. I'd like to be able to expand on a few colors, but still keep that muted, understated color that is so lovely. Is the key to stay away from cadmiums? signed; Olive Drab

Dear Olive;

That's a hard question. But I will try to throw an answer at it. The deep answer is if you want to paint in the reserved colors like the old paintings in the museums you will have to paint in the colors like the bold paintings in museums. By this I mean that setting your palette with earth colors and limiting modern pigments can get you there sometimes, the real answer is more in your color choices than in the paint. I have seen Emile Gruppe paintings done with pthalo and the cadmiums that look like they were painted in old master colors, so it can be done by deciding to use that sort of color and doing it.

You can force yourself to paint in a far more "old timey" color by limiting the colors on your palette, I have done a number of paintings using reduced earth color palettes and it sounds like you have done some too. Here is a possible palette.
  • Yellow ocher, or gold ocher
  • Burnt sienna
  • Ivory Black, or blue black
  • Indian red
  • Vermilion, well not real vermilion but a vermilion colored equivalent, probably not cadmium red. A permanent red from Rermbrandt or Sennelier would fit here. Most of the manufacturers make a warm red like this.
  • Alizarin crimson (permanent)
  • Ultramarine, or Prussian blue, This is to be used in very limited quantities.
  • Possibly viridian, or chromium oxide
  • White Your choice which, but flake (lead) white would be best. However most artists don't like to use that because of it's toxicity so Titanium will probably be your choice.
It is possible to maintain a very restrained look using the earth colors and then "decorating" key areas of the painting with more assertive colors.You might consider premixing a handful of colors on your palette while looking at a Corot or other old painting you like. Then trying to make the painting mostly using those.

More about drying in.


I will return to the posts on color soon. I get e-mail questions and I thought I would answer a few of those.

Dear Stape;
What makes some colors shiny and others matte after drying? I've noticed that some colors really shine and others are like a tiny layer of black hole sucking in available light. These is especially apparent when looking at the painting from the side. Is it medium, mixing, type of paint, ground? I read you said that Liquin could make it matte. Is that the only cause? Humm. A coat of varnish takes care of business but then everything is homogenized. I would love to learn to control this for it to do my bidding rather than my painting looking like a blotchy hot mess unless varnished.
signed; Matte

Dear Matte;

You have probably had the experience of working in watercolor and as the water evaporated the colors dulled. To some extent the same thing happens to oils. When the surface loses its sheen, less light is bounced back to your eyes and the colors appear dulled. Varnishing restores that sheen to the surface and the painting looks like it did when you painted it. This problem is called "drying in" and has a number of causes. They are:
  • an overly absorbent ground. Try an oil primed linen, that might help.
  • Some colors are more prone to drying in, Black, burnt umber and dark colors in general. Some pigments are able to suck up great quantities of oil. When that oil drops into the layers below it, you have a dried in spot.
  • painting with thinner rather than a medium, there are lots of mediums but I use alkyds. Liquin gives a satin finish, Galkyd gives a gloss, and walnut oil-alkyd gives a very glossy finish. Varnish and oil mediums will help too, although I think they are more prone to drying in than alkyd.
  • some drying in is probably unavoidable, it is just a part of oil painting. But it is easily remedied.
  • Even if it is not dried in today, it will almost certainly dry in a little over the next year. So retouching a painting is a good idea anyway. Down the road you will want to get a real coat of varnish on it. Then the problem should be over.
There are a number of ways to bring back the gloss on the surface. If the painting is still wet, shoot it with retouch from a can or a mouth atomizer. Go easy, use too much and the painting might melt. Perhaps that is what happened to you. Used carefully this shouldn't happen. Don't put on so much that the varnish pools on the surface. Give it little thin coats so it dries quickly.

If the painting is dry, you have a number of options. You can polish the surface sometimes with a cloth or a pair of Ryan Seacrest's old nylon stockings. You can also "oil out" the painting. Put a small amount of linseed oil on a lint free cloth and put a very thin coat of oil on the pictures surface. Make sure the painting is completely dry first though. You don't want to smear those little spots of cadmium yellow that you thought were dry. You can also do this with Liquin or Galkyd, but remember, that is not a final varnish!

Friday, September 10, 2010

Painting with no brushstrokes




Dear Stape:

- How do I paint without showing brush strokes? I read all your posts about brushstrokes and it was very helpful and you mentioned painting with no brushstrokes but didn't explain a technique. Sure, we all love a 'confident painterly' brush strokes but what if I'm in the mood for a classic? Many old school paintings are plate smooth with fantastic effect. I'd like to tap into that. I've tried softer brushes, sables, thinning and brushing it after it dried a bit (which worked a little but blended the colors more than I would wish). How do I flatten those tiny juicy hills and valleys?

Painting without brushstrokes requires a different approach than the thick, one shot impressionist method. Generally it is best to work with a finished drawing transferred to your canvas. This will help you paint thinly and without building up much paint. A highly finished underpainting is the next step, that should be one earth color and thinner. Care needs to be taken to keep from building up a surface or ridges where the different shapes come together. In gfact if it is not completely smooth, scrape it when dry with the side of your palette knife.

Once you have your completely rendered monotone underpainting, use a medium with a high gloss, like Gamblin's Gamsol, a varnish and oil medium or walnut oil-alkyd medium to thinly paint the color in on top of your underpainting. Try to keep the paint a little more liquid than you would using bristles in an alla prima piece. Use soft brushes, sables or synthetics and keep your edges soft and fused. Round brushes rather than flats will help to conceal your strokes too. Be careful where edges come together not to build up a ridge of paint there.

At the end of your painting session, take a 1/4 inch sable brush and fuse your edges together and soften the passages where you have overly visible brush strokes.Police your painting, looking for places that need to be smoothed out. Do this the last thing each session you work on the painting. If you let the paint dry with a ridge or visible brushstroke you may be stuck with it.The trick is not to build up brushstrokes in the first place, rather than relying on brushing them out later.

Painting smoothly is a discipline and you will have to work at it to get it down. But it is not terribly difficult. Drawing is difficult! If you have the drawing down, the smooth painting part is a lot easier. Fudging and repainting creates surface and you don't want that. Ideally your painting will be two "skins" thick. The underpainting is one and the colored layer is two. Of course that is an ideal, but strive for that.

Wednesday, September 8, 2010

Complimentary colors and mixing neutrals


Over the last several nights I laid (layed?) out the following principles:

MIXTURES OF TWO PRIMARIES FORM THE SECONDARY COLORS, ORANGE, PURPLE AND GREEN.

IF YOU MIX CERTAIN SECONDARIES WITH A PRIMARY, YOU FORM A TERTIARY COLOR.

Tonight I am going to add a third;

If you look across the color wheel from any color you will find its complement.That is, its opposite.

IF YOU MIX ANY TWO PRIMARIES YOU WILL FORM THE COMPLIMENT OF THE THIRD PRIMARY WHICH YOU DIDN'T INCLUDE IN THE MIXTURE.

Here is an example of that, say you mix red and yellow together and make an orange, orange is the complement of blue. Blue is the third primary. You used yellow and red already, blue, the unused primary is the complement of orange.

IF YOU MIX COMPLEMENTS YOU GET A NEUTRAL, OR GRAY.

If you think about that for a second it makes sense. A gray or a black is the presence of a three colors. we saw above that the two different primaries were the complement of the unused primary. If we then throw that unused primary into the mix we have all three primaries in there which makes a gray or black.

So if you mix two complements you make gray.

Here is a list of the compliments from our color wheel;
  • yellow and purple(violet)
  • blue and orange
  • red and green
  • yellow-orange and blue-violet
  • yellow-green and red-violet
  • red orange and blue green.
Complements drive your color. Without complements your color will be weak. If you want a color to be powerful, you need to get some of its complement next to it.

I am moving my blog to Wordpress. The new URL address where I soon will be posting new entries is: stapletonkearns-blog.com. You can check it out right now but I am still in the process of moving. There will be a redirect of the URL stapletonkearns.blogspot.com that you are using now and all the links and feeds should still work without your changing anything. I also will leave this blog up just in case.

The voting on text color is proceeding, if you haven't voted, the poll is in the upper right hand corner of the sidebar. The black text on white folks are losing.